Extron Electronics MAV Plus Series User Guide User Manual
Page 105
Command and Response Table for SIS Commands (continued)
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Direct write process —
NOTE: The direct write of a global preset should always be preceded by a clear global preset ties command of that same preset number.
In a directly-written preset, the input for each output position (or no tied input) remains unchanged unless overwritten or cleared.
If you do not
clear the ties in a global preset number before you directly write a global preset to that number, ties that are part of the
previous version of the specified preset with the same number can unexpectedly become part of the newly-created preset.
Clear global preset ties
E
+
X(
P0*!
}
Spr
X(]
Clear all ties in preset
X(
.
Directly write a global preset
E
+
X(
P
X!
*
X@
!
X!
*
X@
%
X!
*
X@
$ ...
X!
*
X@
&
}
Enter as many ties as are valid. The
tie
all (
!
),
tie RGB (
&
),
tie video (
%
), and
tie audio (
$
) commands are all valid.
Spr
X(]
Example:
E
+27P0*!
}
Spr27
]
Clear all ties in preset 27.
Esc
+27P12*5!10*09%3*2$3*8&
Brackets are shown to separate ties for
clarity only. Create global preset 27,
which ties video and audio input 12 to
output 5, video input 10 to output 9,
audio input 3 to output 2, and video
input 3 to output 8.
Spr27
]
Directly write a room preset
E
+
X1)
*
X(
P
X!
*
X@
!
X!
*
X@
%
X!
*
X@
$ ...
X!
*
X@
&
}
Enter as many ties as are valid for
this model.
Tie all (
!
),
tie RGBHV
(
&
),
tie video (
%
), and
tie audio (
$
)
commands are all valid.
Rmm
X1)
•Spr
X(]
Example:
Esc
+7*3P12*7&11*5$4*5%6*6!
Brackets are shown to separate ties
for clarity only. Create preset 3 for
room 7, which ties input 12 to output
7, input 11 to output 5, input 4 to
output 15, and input 6 to output 6.
Rmm07•Spr03
]
View ties, gain, volume, mutes, and presets
View video and audio output tie
X@
!
X!]
Example:
15!
27
]
Input 27 video and audio are tied to
output 15.
View RGBHV output tie
X@
&
X!]
Example:
7&
02
]
Input 2 RGB is tied to output 7.
View video output tie
X@
%
X!]
Example:
3%
06
]
Input 6 video is tied to output 3.
View input gain or attenuation
X$
G
X^]
Example:
4G
–02
]
Gain for input 4 is -2 dB.
View output volume
X@
V
X*]
Example:
7V
55
]
Volume for output 7 is 55 steps (9 dB
of attenuation, 86.5% of total volume).
NOTE:
X!
= Input number (for tie)
00
– (maximum number of inputs for your model) (
00
= untied)
X@
= Output number
01
– (maximum number of outputs for your model)
X$
= Input number (for other than tie)
01
– (maximum number of inputs for your model)
X^
= Numeric dB value
–18
to
+24
(45 steps of gain or attenuation) (Default = 0 dB)
X*
= Volume
00
–
64
(1 dB per step except for
0
-to-
1
X(
= Global or room preset number
00
-
32
,
10
maximum for a room preset (
00
= current configuration for view only)
X1)
= Room number (for room presets)
10
max. (Each can have up to 10 presets (
X(
s) assigned.)
CrossPoint and MAV Series Matrix Switchers • Programming Guide
99