Using presets, Presets – Extron Electronics MAV Plus Series User Guide User Manual
Page 63
Using Presets
The current configuration (configuration 0) can be saved as a preset in any one of 32 preset
memory addresses. All 32 presets are assigned to the input buttons and (where necessary)
output buttons and are available to be either saved or retrieved from the front panel. All 32
presets can be selected from the front panel to be either saved or retrieved. When a preset
is retrieved from memory, it becomes the
current configuration.
NOTES:
•
Only the audio and video ties are stored and recalled; RGB delay and audio gain and
volume settings are not saved, and they do not change when a preset is recalled.
•
Presets
cannot be viewed from the front panel unless they are recalled as the
current configuration. Presets can be viewed using the Matrix Switchers Control
Program (see
).
•
The current configuration and all presets are stored in non-volatile memory. When
power is removed and restored, the current configuration is still active and all
presets are retained.
•
When a preset is recalled, it replaces the current configuration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the current
configuration ties in favor of the preset configuration ties.
•
All models have 32 presets; on models with fewer than 32 input and output
buttons, preset numbers that are too high to be available from the front panel are
still accessible under serial port or Ethernet control.
•
Figure 37 shows the presets associated with the three input and output button
configurations for the CrossPoint and MAV matrix switchers.
I
N
P
U
T
S
1
24 x 8, 24 x 12, 24 x 24, 32 x 8, 32 x 16, and 32 x 32 matrix sizes
Input
buttons
Input
buttons
Output
buttons
Input
buttons
Output
buttons
Preset
1
8 x 16, 16 x 4, 16 x 8, 12 x 12, and 16 x 16 matrix sizes
Preset
1
Preset
6
Preset
7
Preset
10
Preset
15
Preset
16
Preset
11
Preset
3
Preset
8
Preset
9
Preset
4
Preset
5
Preset
13
Preset
14
Preset
12
Preset
2
Preset
17
Preset
22
Preset
23
Preset
26
Preset
31
Preset
32
Preset
27
Preset
19
Preset
24
Preset
25
Preset
20
Preset
21
Preset
29
Preset
30
Preset
28
Preset
18
Preset
5
Preset
6
Preset
10
Preset
7
Preset
13
Preset
14
Preset
15
Preset
2
Preset
8
Preset
9
Preset
3
Preset
4
Preset
11
Preset
12
Preset
16
Preset
17
Preset
21
Preset
22
Preset
26
Preset
23
Preset
29
Preset
30
Preset
31
Preset
18
Preset
24
Preset
25
Preset
19
Preset
20
Preset
27
Preset
28
Preset
32
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12
14 15 16
13
1 2 3 4 5 6 7 8 9 10 11 12
14 15 16
13
OUTPUTS
8 x 4, 8 x 8, 12 x 4, and 12 x 8 matrix sizes
Preset
1
Preset
5
Preset
10
Preset
2
Preset
11
Preset
3
Preset
8
Preset
12
Preset
6
Preset
7
Preset
4
Preset
13
Preset
17
Preset
14
Preset
15
Preset
20
Preset
18
Preset
19
Preset
16
Preset
9
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8
OUTPUTS
NOTE: Presets 21 through 32 are available
via serial port and Ethernet control only.
Figure 37.
CrossPoint or MAV Plus 1600 Preset Locations
CrossPoint and MAV Series Matrix Switchers • Operation
57