Extron Electronics MAV Plus Series User Guide - Manual (Page 113)

Command and Response Table for IP- and Remote Port Specific SIS Commands
Symbol definitions
X3) = Matrix name (Up to 24 alphanumeric characters)
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 109).
X3! = Default name Model name + last 3 pairs of MAC address. nn = 16 or 32.
X3@ = Time and date (for set) In the format: MM/DD/YY•HH:MM:SS where:
MM = month:
01 (January) through 12 (December)
DD = 01 through 31
YY = 00 through 99
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
X3# = Time and date (for read) In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where:
Day of the week:
Mon through Sun
DD = 01 through 31
Mmm = month: Jan through Dec
YYYY = 2000 through 2099
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
X3$ = GMT offset –12 . 0 through +14 . 0 . Hours and minutes removed from GMT
X3% = Daylight Savings Time 0 = Daylight Savings Time off or ignore
1 = Daylight Savings Time on (North America)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
X3^ = IP address ###.###.###.###
X3& = Hardware (MAC) address ##-##-##-##-##-##
X3* = Number of open connections 000 - 200
X3( = Password Up to 12 alphanumeric characters
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 109).
X4) = Domain name Standard domain name rules apply (for example: xxx.com)
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 109). The @ character is
acceptable only as the lead-in to the domain name (such as @extron.com).
X4! = E-mail account 65 - 72 . 65 = e-mail recipient 1, 66 = 2, 67 = 3, ... 72 = recipient #8
X4@ = E-mail address Typical e-mail address format (for example: [email protected])
X4# = Notify when? 0 = no response 3 = both 1 & 2
1 = fail or missing 4 = suspend
2 = fixed or restored
X4$ = Notification selections Matrix size 2412 and larger: 01 - 32 = input 1 through input 32
98 = power supplies
99 = fans
Matrix size 1616 and smaller: 01 - 17 = input 1 through input 16
17 = power supply
X4% = Notify status (for read) 34- or 17-digit number. For each digit: 0 = do not notify, 1 = notify
X4^ = DHCP 0 = off, 1 = on
X4& = Port number 00 = All ports
01 = Rear panel Remote RS-232/RS-422 port
02 = Front panel Configuration port
X4* = Baud rate 9600 , 19200 , 38400 , 115200
X4( = Parity odd, even, none, mark, space (only the first letter required)
X5) = Data bits 7 , 8
X5! = Stop bits 1 , 2
X5@ = Port type 0 = RS-232
1 = RS-422
CrossPoint and MAV Series Matrix Switchers • Programming Guide 107