Extron Electronics MAV Plus Series User Guide User Manual
Page 62
3.
Select an output: Press and release the Output 17 button.
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 31 32
1
2
5 16
17 18 11 32
I
N
P
U
T
S
O
U
T
P
U
T
S
Press and release the
Output 17 button.
The button lights green.
The input buttons 1 through 10 display the RGB
delay of the selected output.
Each lit input button indicates half a second of delay.
In this example, the lit input buttons display 3.5
seconds of RGB delay.
3.5
3.0
2.5
2.0
1.5
1.0
0.5
NOTE: The RGB delay is protected when front panel lock mode 2 is selected. You
can view the groups in lock mode 2, but you cannot change them from the front
panel (see
Setting the Front Panel Locks (Executive Modes)
on page 75).
If front panel lock mode 2 is selected and you try to perform step 4, the actions
are ignored and the Enter, RGBHV or Video, and Audio buttons flash.
4.
Adjust the RGB delay: Press and release the Esc (>) button once to increase the RGB
delay by a half second.
Press and release the Esc (>) button twice more to increase the RGB delay by a whole
second. Note the input button indication changes that occur each time the Esc (>)
button is pressed and released.
ESC
ESC
ESC
1 2 3 4 5 6 7 8 9 10
17 18 19 20 21 22 23 24 25 26
16
32
I
N
P
U
T
S
NOTE: This drawing shows the
results of 3 pushes of the Esc
( ) button.
3.5
4.0
4.5
5.0
3.0
2.5
2.0
1.5
1.0
0.5
Press the Esc button to increase
the RGB interval that is applied to
switches to the selected output by
a half second per button push.
Input buttons 1 through 10 display the RGB delay of the selected output.
Each lit input button indicates half a second of delay.
In this example, the lit input buttons display 5.0 seconds of RGB interval.
5.
Exit RGB Delay mode: Press and release the RGBHV button.
I / O
RGBHV
AUDIO
The Audio button lights red.
Press the RGBHV button
to exit RGB delay mode.
All input buttons and output buttons
return to unlit or background illumination.
The RGBHV button stops
blinking and returns to unlit
or background illumination.
CrossPoint and MAV Series Matrix Switchers • Operation
56