Extron Electronics MAV Plus Series User Guide - Manual (Page 143)

5. If appropriate, select the appropriate Daylight Savings radio button to turn on the
daylight savings time feature for your region or nation.
NOTE: When Daylight Savings Time is turned on, the switcher automatically
updates its internal clock between Standard Time and Daylight Savings Time in
the spring and fall on the date that the time change occurs in the country or region
selected. When Daylight Savings Time is turned off, the switcher does not adjust
its time reference.
6. Click the Submit button.
Passwords Page
Access the Passwords page (see figure 86) by clicking the Passwords link on the left of the
System Settings, Email Settings, or Firmware Upgrade page.
Figure 86. Passwords Page
NOTE: If the switcher is password protected, fields on this page can be edited only by
personnel logged in as administrators.
The fields on the Passwords page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to as many as 12 upper-
case and lower-case alphanumeric characters. Each password must be entered
twice; once in the
Password field and then again in the Re-enter Password field.
Characters in these fields are masked by asterisks ( ***** ). If you do not want to password
protect an access level, leave the Password field and the Re-Enter Password field blank.
After entering the password in both fields, click the Submit button.
NOTE: An administrator password must be created before a user password can be
created.
Resetting a password
Reset an existing password so that no password is required as follows:
1. Clear any existing password.
2. Enter a single space character in the Password and Re-enter Password fields.
3. Click the Submit button.
CrossPoint and MAV Series Matrix Switchers • HTML Operation 137