Extron Electronics MAV Plus Series User Guide - Manual (Page 40)

Input and Output Buttons
NOTES
:
• Input and output buttons cannot select an input number or output number that is
higher than your matrix size supports. Buttons numbered higher than your matrix
size do have other functions as described in the following pages.
• See Front Panel Operations , beginning on page 40 for detailed descriptions of
the following operations.
Primary functions
Action Select input or output for tie being created.
Indication Blink: potential tie/untie.
Lit: current tie
Amber: video and audio tie
Green: video only tie
Red: audio only tie
1 2
3
through up to
32
Secondary functions
I/O Grouping Action 1: Input 1 and
Output 1:
Select I/O
Group mode.
Action 2/
indication: Assign an input or output to the selected group.
Lit: Input or output is assigned to the selected group.
Presets Action Select a preset in Preset mode.
Indication Lit: A preset has already been saved to this location.
Blink: Preset location is selected to be saved.
RGB Delay Indication: CrossPoint:
Input 1 through 10: Indicate the RGB delay.
Input audio
level Action Input buttons: Select the input for audio gain or attenuation adjustment.
Indication Input buttons lit: Input audio selected for adjustment.
Indication Output buttons lit or blinking: Indicate the input gain or attenuation level.
Output
audio
volume Action Output buttons: Select the output for audio volume adjustment.
Indication Output buttons lit: Output audio is selected for adjustment.
Indication Input buttons lit or blinking: Indicated the output volume level.
Output
mutes Action Output buttons: Press and hold to mute or unmute the output.
Indication Output buttons blinking: Output is muted.
Background
illumination Action Input 1 and Input 2:
Toggle between background
illumination or buttons unlit.
CrossPoint and MAV Series Matrix Switchers • Operation 34