Extron Electronics MAV Plus Series User Guide User Manual

Page 124

Advertising
background image

Edit either password field as follows:

1.

Click in the desired

Password

field. The pointer tool becomes a text cursor.

2.

Edit the case-sensitive password as desired.

3.

Press the <Tab> key on the keyboard or click in another field to exit the Password field.

4.

Click the

Take

button to make the password change take effect.

Mail Server IP Address field

The

Mail Server IP Address

field displays the IP address of the mail server that handles

the e-mail for the facility in which the matrix switcher is installed. Standard IP protocol rules
apply to the Mail Server IP address.
Edit this field as follows:

1.

Click in the

Mail Server IP Address

field. The pointer tool becomes a text cursor.

2.

Edit the IP address as desired.

3.

Press the <Tab> key on the keyboard or click in another field to exit the

Mail Server

IP Address

field.

4.

Click the

Take

button to make the address change take effect.

Mail Server Domain Name field

The

Mail Server Domain Name

field displays the domain name that the matrix switcher

uses to log on to the e-mail server. Standard domain conventions (such as xxx.com) apply.

NOTE: The HTML language reserves certain characters for specific functions (see

Special Characters

on page 109). In the

Mail

Serve

Domain

Name

field, the @

character is only acceptable as the lead-in to the domain name (such as @folklore.net).

Edit this field as follows:

1.

Click in the

Mail Server Domain Name

field. The pointer becomes a text cursor.

2.

Edit the name as desired.

3.

Press the <Tab> key on the keyboard or click in another field to exit the

Mail Server

Domain Name

field.

4.

Click the

Take

button to make the name change take effect.

E-mail Addressee fields

The five E-mail Addressee fields permit the administrator to identify the e-mail addresses of
the personnel to whom the matrix switcher e-mails notification of its failure and repair status.
Figure 67 shows a typical e-mail from the switcher.

Miles Standish

From:

Crosspoint/MAV/[email protected]

Sent:

Thursday, May 18, 2006 10:05 AM

To:

Miles Standish

Subject:

Crosspoint/MAV/Matrix-FF-FF-09 - Input #10 Signal Available

Thu, 18 May 2006 10:05:07

Unit Name = Crosspoint/MAV/Matrix-FF-FF-09

Unit IP Address = 192.168.254.254

Figure 67.

Typical Matrix Switcher E-mail

CrossPoint and MAV Series Matrix Switchers • Matrix Software 118

Advertising
This manual is related to the following products: