Extron Electronics MAV Plus Series User Guide - Manual (Page 42)

Control Buttons
NOTE: See Front Panel Operations , beginning on page 40 for detailed descriptions
of the following operations.
Primary functions
Action Save changes Select Preset mode Select View mode Cancel or Escape
Indication Blink: Save needed Blink: Save preset
Lit: Recall preset
View mode
selected
Flashes once
ENTER PRESET VIEW ESC
Secondary functions
I/O Grouping Action/
indication: Select group 1 Select group 2 Select group 3 Select group 4
Port
configuration Action 1 Select Configuration mode.
Action 2 Select 9600 baud Select 19200 baud Select 38400 baud Select 115200 baud
Indication Blink: 9600 baud Blink: 19200 baud Blink: 38400 baud Blink: 115200 baud
Front panel
locks Action1 With Video and
Audio, select Lock
mode 2 or toggle
between mode 0
and mode 2.
RGB Delay Action: CrossPoint:
In RGB Delay
mode, decrease
the switching
interval.
In RGB Delay
mode, increase the
switching interval.
Audio Action In Audio mode,
decrease input
level or output
volume .
In Audio mode,
increase input
level or output
volume .
c
Enter button — The Enter button has two primary functions ( ❏ ) and four secondary
functions ( • ):
❏ Saves configuration or preset changes that you make on the front panel. To create
a simple configuration:

Specify video, audio, or both (see I/O buttons [ item g ] and [ item h ]).

Press the desired input button ( item a ).

Press the desired output button or buttons ( item b ).

Press the Enter button.
❏ Indicates that a potential tie has been created but not saved.
• In the I/O Group mode, select group 1 and indicate the selection.
• With the Preset, View, and Esc buttons, selects Serial Port Selection and
Configuration mode.
• Selects 9600 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode and indicates the selection.
• With the RGBHV or Video and Audio buttons, select front panel security Lock mode
2 or toggle between mode 0 (unlocked) and mode 2.
CrossPoint and MAV Series Matrix Switchers • Operation 36