Reference information, Mounting the switcher, Ed, install the switcher in a rack – Extron Electronics MAV Plus Series User Guide User Manual
Page 162
Reference
Information
This section provides reference information for the CrossPoint or MAV Plus matrix switchers,
including:
•
•
Removing and Installing Button Labels
ATTENTION: Installation and service must be performed by authorized personnel only.
Mounting the Switcher
The matrix switchers are housed in rack-mountable, metal enclosures with 19” rack ears.
The amount of vertical rack space required for each switcher is as follows:
•
2U high enclosure
•
MAV Plus 84, 88, 124, and 128 HDA and HD
•
MAV Plus 84, 88, 124, 128, and 1212 SVA, and SV
•
MAV Plus 84, 88, 124, 128, 816, 1212, 168, and 1616 AV, AV RCA, V, and A
•
MAV Plus 164 A
•
3U high enclosure
•
CrossPoint 84, 88, and 128 HV and HVA
•
MAV Plus 168, 816, 1212, and 1616 SVA and SV
•
MAV Plus 328 and 248 A switchers
•
4U high enclosure
•
MAV Plus 168, 816, and 1616 HDA and HD
•
5U high enclosure
•
MAV Plus 2412, 2424, 3216, 3232 AV, V, and A
•
6U high enclosure
•
CrossPoint 168, 1212, and 1616 HV and HVA
•
8U high enclosure
•
CrossPoint 450 Plus 2412 and 2424 HV and HVA
•
10U high enclosure
•
CrossPoint 450 Plus 3216 and 3232 HV and HVA
CrossPoint and MAV Series Matrix Switchers • Reference Information 156