Extron Electronics MAV Plus Series User Guide - Manual (Page 126)

6
4
5
4
Folder where
firmware is
installed
Figure 68. Downloading Firmware Upgrade Files
5. Connect a Windows-based computer to either the Remote RS-232/RS-432 port (see
item h on
page 26 ), the front panel Configuration port (if equipped, see item a on
page 30 ) or the LAN port (see item i on page 27 ) of the switcher.
6. If necessary, start the Matrix Switchers Control Program and connect to the matrix
switcher (see
Using the Matrix Switcher Control Software , steps 1 through 3,
starting on page 112).
CrossPoint and MAV Series Matrix Switchers • Matrix Software 120