Extron Electronics MAV Plus Series User Guide - Manual (Page 60)

5. Select group 2: Press and release the Preset button.
C O N T R O L
PRESET ENTER ESC VIEW
1 3 2 4
Press and release the Preset button to select group 2.
The button lights to indicate the selection.
Group #
6. Assign inputs and outputs to group 2:
a. Press and release the Input 5 through 8 buttons.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 25 32
I
N
P
U
T
S
Press and release the Input 5 through Input 8 buttons.
The selected buttons light.
b. Press and release the Output 6 through 8 buttons.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 25 32
O
U
T
P
U
T
S
Press and release the Output 5 through Output 8 buttons.
The selected buttons light.
7. Exit I/O Group mode: Simultaneously press and release the RGBHV (CrossPoint
switchers) or Video (MAV Plus switchers) button and Audio button.
NOTE: As an alternative, if you do not push any front panel buttons for
approximately 30 seconds, the front panel times out and the switcher exits I/O
Group mode.
I / O
VIDEO AUDIO
Press and release both buttons.
• Group 1 consists of inputs 1 through 4 and outputs 1 through 4.
• Group 2 consists of inputs 5 through 8 and outputs 5 through 8.
CrossPoint and MAV Series Matrix Switchers • Operation 54