Extron Electronics MAV Plus Series User Guide - Manual (Page 54)

4. Select the desired input or output whose ties you wish to view by pressing the input or
output button.
NOTES:
• When you enter View-only mode, the output buttons light for all outputs without
ties. Likewise, when you press an output button for which there are no ties, the
output buttons light for all outputs without ties.
• To see all ties of the current configuration, press and release each input and
output button, one at a time, with the RGBHV (CrossPoint switchers) or Video
(MAV Plus switchers) button and the Audio button lit.
• In View-only mode, you can view video and audio, video-only, or audio-only
ties. Pressing and releasing the RGBHV (CrossPoint switchers) or Video (MAV
Plus switchers) button and the Audio button toggles each selection on and off.
• When you view video and audio ties, the RGBHV (CrossPoint switchers) or
Video (MAV Plus switchers) button is lit green and the Audio button is lit red.
After you select an input or output, the output buttons light different colors to
show where video and audio ties are not the same (audio is broken away).
• Amber: Video and audio
• Green: Video only
• Red: Audio only.
• After 30 seconds of front panel inactivity, View-only mode automatically
deselects.
Example 4: Viewing video and audio, audio only, and video only ties
In the following example, we view the video and audio, audio only, and video-only ties in the
current configuration. The steps show the front panel indications that result from your action.
NOTE: This example assumes that you have performed example 1 , example 2 , and
example 3 .
1. Clear all selections: Press and release the Esc button.
2. Select View-only mode: Press and release the View button. The View button lights
red.
3. Select video and audio for viewing: Press and release the RGBHV (CrossPoint
switchers) or Video (MAV Plus switchers) button and the Audio button as necessary to
light both.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
O
U
T
P
U
T
S
I / O
VIDEO AUDIO
Until you select an input, the buttons for all untied
outputs light amber if no inputs are tied, green if
no video inputs are tied (only audio is tied), or
red if no audio inputs are tied (only video is tied).
Press the Audio button
to toggle on and off.
The button lights red
when selected.
Press the RGBHV or Video
button to toggle on and off.
The button lights green
when selected.
CrossPoint and MAV Series Matrix Switchers • Operation 48