Extron Electronics MAV Plus Series User Guide - Manual (Page 142)

MAC Address field
The Media Access Control (MAC) Address is hardcoded in the switcher and cannot be
changed.
Firmware field
The Firmware field identifies the installed firmware version. This field is hardcoded in the
switcher and cannot be changed.
Model and Part Number fields
The Model and Part Number fields identify the switcher. These fields are hardcoded in the
switcher and cannot be changed.
Date/Time Settings fields
The Date/Time Settings fields (see figure 85) provide a location for viewing and setting the
time functions.
Figure 85. Date/Time Settings Fields
To sync the switcher clock to the connected PC, simply click the Local Date/Time button
and then click the Submit button.
NOTE: Use of the Local Date/Time button has no effect on the Zone and Daylight
Savings Time functions.
For more complete control of the date and time settings, change the settings as follows:
1. Click the drop box for the desired value. The adjustable variables are month, day, year,
hours, minutes, AM/PM, and (time) zone. A drop-down scroll box appears (the year
drop box is selected in figure 85).
2. Click and drag the slider or click the scroll up button or the scroll down button until
the desired value is visible.
3. Click the desired value.
NOTES:
• If setting the time, set the local time. The Zone variable allows you to then enter
the offset from Greenwich Mean Time (GMT).
• The Zone field identifies the standard time zone selected and displays the
amount of time, in hours and minutes, that the local time varies from the GMT
international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
CrossPoint and MAV Series Matrix Switchers • HTML Operation 136