Extron Electronics MAV Plus Series User Guide - Manual (Page 104)

Command and Response Table for SIS Commands (continued)
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Audio mutes
Mute audio X@ *1Z Amt X@ *1 ] Mute output X@ audio (audio off).
Unmute audio X@ *0Z Amt X@ *0 ] Unmute output X@ audio (audio on).
View audio mute status X@ Z X#]
Global audio mute 1*Z Amt1 ] Mute all audio outputs.
Global audio unmute 0*Z Amt0 ] Unmute all audio outputs.
Save, recall, and directly write global and room presets
NOTES:
• If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
• If the room is nonexistent, the matrix switcher responds with the error code E21.
• The following characters are invalid or not recommended in preset names: + - , ` @ = [ ] { } ‘ “ ; : | \ and ?.
Save current configuration as a
global preset X( , Spr X(] Command character is a comma.
Example:
9
, Spr09 ] Save current ties as preset 9.
Recall a global preset X( . Rpr X(] Command character is a period.
Example: 5. Rpr05 ] Recall preset 5, which becomes the
current configuration.
Write room outputs EX1) , X@ 1
, X@ 2
,
... X@ n MR } Mpr X1) , X@ 1
, X@ 2
,
... X@ n ] See notes.
NOTES:
• A room can contain a maximum of 16 outputs.
• An output can belong to only one room.
• The maximum number of rooms ( X1) ) is 10.
•
If no room name is assigned, the default name ( X1! ) is “ Room # X1) ••••”.
Example: E 8,3,04,5,6MR
}
Mpr8,03,04,05,06
] Outputs 3, 4, 5, and 6 are assigned to
room 8.
Read room outputs EX1) MR } X1! , X@ 1 , X@ 2 , ... X@ n
]
Example: E 3MR } Room•#03••••,01,02,08,09 ]
Outputs 1, 2, 8, and 9 are assigned to
room 3, which is named “Room #03”.
Save current configuration as a
room preset X1) * X( ,
Rmm X1) •Spr X( ] Command character is a comma.
Example:
3*9
, Rmm03•Spr09 ] Save current ties as preset 9 for room 3.
Recall room preset X1) * X( . Rmm X1) •Rpr X(] Command character is a period.
NOTE: X@ = Output number 01 – (maximum number of outputs for your model)
X# = Mute status 0 = off (unmuted) 1 = on (muted)
X( = Global or room preset number 00 - 32 , 10 maximum for a room preset ( 00 = current configuration for view only)
X1) = Room number (for room presets) 10 max. (Each can have up to 10 presets ( X( s) assigned.)
X1! = Name 12 characters (upper- and lower-case alphanumeric characters and / and spaces) max.
CrossPoint and MAV Series Matrix Switchers • Programming Guide 98