Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 111)

Extended System-Level Command Functions
Class Series Programmer’s Manual 97
STX KQ Query Memory Configuration
This command causes the printer to transmit, in a model-dependent format, its DRAM memory
configuration (i.e., total amount installed, amount available for configuration, and amount currently
assigned to specific functions or entities) to the host device.
Syntax:
<STX>KQ<CR>
Non-Display Model
response format:
INTERNAL MEMORY<CR>
VER: aa-cdd.ee mm/dd/yy<CR>
INSTALLED: iiii<CR>
AVAILABLE: vvvv<CR>
MODULE: X:xxxx<CR>
SCALABLE: ssss<CR>
LABEL MEM: LLLL<CR>
LABEL SIZE: wwww:gggg:oo<CR>
Where:
<CR>
- ASCII Carriage Return (0x0D) record delimiter.
aa-
cdd.ee
mm/dd/yy - ASCII string sequence that represents the firmware version
number string.
iiii
- The number of 4KB blocks of DRAM memory.
vvvv - The number of 4KB blocks of DRAM available for
configuration.
X:
- ASCII character identifying a DRAM module followed by an
ASCII colon (:). If no Internal Module is present, this field
and its associated legend will not appear.
xxxx
- The number of 4KB blocks of DRAM allocated as an
Internal Module.
ssss - The number of 4KB blocks of DRAM assigned to the
smooth scalable font processor cache.
LLLL
- The number of 4KB blocks of DRAM assigned to label print
buffer.
wwww
- Current maximum printable label width (in 100 ths of an inch
or millimeters).
gggg - Current printable length (in 100 ths of an inch or millimeters),
200 min. / 640 max.
oo
- Current label dimension unit’s designation: “IN” for inches
or “MM” for millimeters.