Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 261)

Class Series Programmer’s Manual 247
Appendix N
Class Series DPL Constraint Cross-Reference
 Note: Throughout the tables below, the following standards are used:
X = Supported Command
ND = Non-Display
<SOH> Constraints
Printer
Command Description
A-
Class
E-Cla
ss
H-Class I-Cl
ass
S &
M-Class (N
D)
M-
Class
W-Cl
ass
# Reset X X X X X X X
* Reset X X X X X
A Send ASCII Status String X X X X X X X
B
Toggle Pause X X X X X X X
C Stop/Cancel X X X X X X X
D SOH Shutdown X X
E Send Batch Quantity X X X X X X X
F
Send Status Byte X X X X X X X
U
Update System Database with Current
Database
X X X X X X X
Table N-1: <SOH> Constraints