Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 30)

System-Level Command Functions
Class Series Programmer’s Manual 16
STX a Enable Feedback Characters
This command enables the feedback ASCII hex characters to be returned from the printer following
specific events after each completed batch of labels when using serial communications. The default
value is ‘Off’.
Syntax: <STX>a
Printer response: Event dependent. (Also, see Appendix D for error codes.)
Where:
Event Return Characters
Invalid character
0x07
( BEL )
Label printed
0x1E
( RS )
End of batch
0x1F
( US )
STX B Get Printer Time and Date Information
This command instructs the printer to retrieve its internal time and date information.
Syntax: <STX>B
Sample: <STX>B
Printer response format: wmmddyyyyhhMMjjj<CR>
Where:
w
1 digit for day of week; 1 = Monday
mm
2 digits for month
dd 2 digits for day
yyyy 4 digits for year
hh 2 digits for hour in 24 hour format
MM 2 digits for minutes
jjj
3 digits for Julian date / constant*
* See <STX>A for details and restrictions.
Printer response sample: 1020319960855034<CR>