Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 192)

Appendix F – Barcode Summary Data
Class Series Programmer’s Manual 178
Bar
Code
ID
Symbology Length Checksum Valid ASCII Characters, decimal value representation
Linear
Scanner
Supported
u UPS MaxiCode w/ Byte Count Specified Yes Alphanumeric
v FIM 1 No A, B, C, D
z PDF417 Varies Yes All
Z PDF417 w/ Byte Count Specified Yes All
W1c DataMatrix Varies Yes All 8-bit values
W1C DataMatrix w/ Byte Count Specified Yes All 8-bit values
W1d QR Code – Auto format Varies Yes Alphanumeric
W1D QR Code – Manual format Varies Yes Single-byte or Kanji double-byte
W1f Aztec Varies Yes All 8-bit values
W1F Aztec w/ Byte Count Specified Yes All 8-bit values
W1G
/ g USD-8 (Code 11) Varies Yes 45, 48-57
W1I EAN 128 w/auto subset switching [2] Varies Yes 32-127 
W1J Code 128 w/auto subset switching [3] Varies Yes 32-127 
W1k GS1 DataBar [2] Varies Yes Numeric / Alphanumeric (type dependant)
W1p USPS 4CB [4] Varies No 48-57 Numeric only
W1R UCC/EAN Code 128 K-MART NON EDI 18 Yes 48-57 Numeric only
W1t TCIF Linked Bar Code 3 of 9 (TLC39) Varies Yes Alphanumeric
W1z MicroPDF417 Varies Yes All 8-bit values
W1Z MicroPDF417 w/ Byte Count Specified Yes All 8-bit values
[1] Readable with the Linear Scanner Option only when using ‘Barcode Count’ method (see <STX>KcSN for details).
[2] Available for display-equipped printers and EX2 models only.
[3] Unavailable for the E-Class.
[4] Unavailable for the E-Class and M-4206 model printers.
Table F-1: Bar Code Characteristics