Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 48)

System-Level Command Functions
Class Series Programmer’s Manual 34
STX Y Output Sensor Values
This command causes a sensor value response. When <STX>Y is received, the printer will respond
with the digitally converted values of the internal analog sensors (see below). To repeat the display of
values, send the printer a ‘SPACE’ character (20 hexadecimal); or, send <ESC> to terminate this
function.
Non-Display Models: The printer must be in Test Mode for the command to function. To enable the
Test Mode see the <STX>KD command.
Display-Equipped Models: The printer must have Feedback Characters enabled for this command to
function. (Feedback Mode [Characters] can be enabled via command or menu setting; see the
<STX>KcFM command or the Operator’s Manual for additional information).
Syntax:
<STX>Y
Printer response:
Thermistor ADC: 0048 Reflective ADC: 0000
Transmissive ADC: 0204 Paperout ADC: 0000 24 Volt ADC:
0217 Contrast ADC: 0093 TOF Adjust ADC: 0170 Ribbon
ADC: 0125 Battery Level: Good <CR>
Where:
Paperout ADC: 0225
indicates paper is present;
0000
indicates paper is not present.
Battery level: Good
indicates a sufficient battery charge;
Low
indicates an insufficient charge.
 Notes: • Equipped sensors may vary with printer, model, and options.
• Some readings require printer-controlled paper movement to produce a meaningful value.
• Media Sensor readings require the appropriate sensor selection, transmissive ( <STX>e
) or
reflective ( <STX>r
) , and label stock in the Media Sensor.
STX y
Select Font Symbol Set
This command selects the scalable font symbol set. The selected symbol set remains active until
another symbol set is selected. See the <STX>KS command and Appendices E, I, and H for more
information. Option dependant, and not all symbol sets can be used with all fonts.
Syntax: <STX>ySxx
Where: S - Byte-size designation; see Appendix H:
S
= Single byte symbol sets.
U = Double byte symbol sets.
xx - Symbol set selection.
Sample:
<STX>ySPM
The sample selects the PC-850 multilingual set.