Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 69)

Extended System-Level Command Functions
Class Series Programmer’s Manual 55
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Display-Equipped Media Settings
Reflective Paper Value RV 0 – 255 N/A
EX2 N/A
N/A
Reflective TOF Bias [2]
RB 0 – 50 .1 Volt DC
Non-Display
(except EX2)
14 N/A
Reflective TOF Delta [2]
RD
0 – 50 .1 Volt DC
Non-Display
(except EX2)
13 N/A
Reflective TOF Gain [2]
RG 0 – 15 .1 Volt DC
Non-Display
(except EX2)
12 N/A
Retract Delay RW 1 – 255
Specified value,
multiplied by ten
milliseconds
Display-Equipped Printer Options N/A
Rewinder Equipped
RM
A/Y, E, N/D
A or Y = Auto,
E = Enabled,
N or D = Disabled
Display-Equipped Printer Options N/A
Rewinder Adjust
RR
-xx, +yy
Applied torque, where
-30 to +15 is the valid
range.
Display-Equipped Printer Options N/A
RFID Configuration RI
M, A, D, S,
L, R, W, E, P,
T, N, U, V
See Table 5-8. Display-Equipped Printer Options N/A
Table 5-1: Configuration Set Commands (continued)