Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 67)

Extended System-Level Command Functions
Class Series Programmer’s Manual 53
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Display-Equipped Communications
Parallel Direction PP xz See Table 5-7.
EX2 N/A
N/A
Password Set PW
A – Z,
0 – 9
Four characters
(or, if security is enabled
then eight characters).
Display-Equipped System Settings N/A
Display-Equipped System Settings
Pause Mode PM Y, N
Y = Enabled,
N = Disabled
EX2 N/A
<STX>J
Display-Equipped System Settings
Peel Mode PE Y, N
Y = Enabled,
N = Disabled
EX2 N/A
N/A
Display-Equipped Print Control
Non-Display 8
Present Adjust [1]
PA xxx dots
Model specific,
see Appendix K;
and, see
Present Adjust Fine
Tune.
Non-Display 6
N/A
Display-Equipped Print Control
Present Adjust Fine Tune PJ + / – dots
Dots (model specific),
see Appendix K.
Non-Display 6
N/A
Table 5-1: Configuration Set Commands (continued)