Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 44)

System-Level Command Functions
Class Series Programmer’s Manual 30
Command Values for Bits Assigned
Bit
n
Value
3 2 1 0
0 0 0 0 0
1 0 0 0 1
4 0 1 0 0
5 0 1 0 1
Table 4-2: Software Switch Binary
STX v
Request Firmware Version
This command causes the printer to send its version string (this data is the same as that printed on the
configuration label). The version may be different from printer to printer.
Syntax:
<STX>v
Printer Response: VER: 4308 – 06.06 07/09/2001 <CR>