Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 75)

Extended System-Level Command Functions
Class Series Programmer’s Manual 61
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Display-Equipped
WiFi Setup
WE
A, C, F, I, L,
M, N, P, R,
T, V, X
See Table 5-13.
EX2
N/A N/A
Display-Equipped
WiFi Security
WS
A, K, S, L,
P, U
See Table 5-14.
EX2
N/A N/A
1. Commands are provided for backward compatibility on EX2. The KcQQQ command will respond with the new command equivalent; see associated new commands.
2. The EX2 uses the same Sensor Calibration value setup commands as display model printers.
3. The EX2 will accept Display-Equipped module IDs (D & G) as command parameters for upward compatibility; however, query commands will result in printer responses with
module IDs that are non-display compatible, providing backward compatibility.
4. Present distance changes for EX2 will only be accepted if the Stop Location (SL) is set to “Host.”
Table 5-1: Configuration Set Commands