Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 70)

Extended System-Level Command Functions
Class Series Programmer’s Manual 56
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Display-Equipped Media Settings
Ribbon Low Diameter RL 100 – 200 1/100 in.
EX2 N/A
N/A
Ribbon Low Pause RP Y, N
Y = Enabled,
N = Disabled
Display-Equipped Media Settings N/A
Ribbon Low Signal
RS
3, 4
3 = Active Low,
4 = Active High
Display-Equipped Print Options N/A
Ribbon Saver Enable RE A/Y, E, N/D
A or Y = Auto,
E = Enabled,
N or D = Disabled
Display-Equipped Printer Options <STX>R
Display-Equipped Print Control
Row Adjust [1]
RA
xxxx dots
Model specific, see
Appendix K;
and,
see Row Adjust Fine
Tune
Non-Display 6
N/A
Display-Equipped Printer Control
Row Adjust Fine Tune RF + / – dots
Resolution specific; see
Appendix K.
EX2 N/A
N/A
Row Offset RO 0 – 9999 1/100 in. Display-Equipped Print Control Rnnnn
Table 5-1: Configuration Set Commands (continued)