Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 140)

Label Formatting Command Functions
Class Series Programmer’s Manual 126
STX S Recall Global Data and Place in Field
This command, when in the format record data field, places data from a specified global register into
the data field. See the G command.
Syntax: <STX>Sn
Where:
n
- Specifies the global register (A − P) that contains the data to
place into the data field.
Sample:
<STX>L<CR>
121100000000000DMX<CR>
G<CR>
1A2210001000000<STX>SA<CR>
E<CR>
The sample places the string “DMX” into the next available global register (A), and then line 4 is
effectively replaced by the data from global register A.
STX T
Print Time and Date
This command, using string characters and markers, allows time and date data to be selected and
retrieved from the printer’s internal clock. In addition, the <STX>T may be preceded by data to be
printed/encoded, and/or the string may now be terminated by an <STX> command and then followed
by more data terminated by a <CR>. The string characters/markers are not printed; instead, the
printed label will show a corresponding print value.
 Note: When using substitution, you must ensure the converted string produces valid characters for the
selected bar code / font.
Syntax:
<STX>Tstring<CR>
Where: string - Is any set of characters, A - Z and a – h. See the table below.
String
Characters
Print
Values
String
Markers
Print
Values
A Day of the week (Mon = 1, Sun = 7) VW Hour in 24 hour format
BCD Day of the week name XY Hour in 12 hour format
EF
Month number
Za
Minutes
GH...O
Month name
gh
Seconds
PQ
Day
bc
AM or PM
RSTU Year def Julian date
Table 6-3: Time and Date String Characters
 Note: The sample listings below assume a current printer date of December 21, 1998.