Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 244)

Appendix J – General Purpose Input Output Ports
Class Series Programmer’s Manual 230
Applicator Interface Card (Version 1)
The Applicator Interface Card (Version 1) is equipped with a GPIO Port, an Auxiliary (Serial B) Port and
two LEDs.
9
5
4
3
2
1
8
7
6
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Auxiliary Port, J1
Green and Yellow LEDs
GPIO Port, J2
Applicator Interface Card
Connector
Pin-Outs
Applicator Interface Card Location and Connector Pin-outs (as found in some A-Class models)
Applicator Interface Card Jumper Locations