Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 151)

Generating Label Formats
Class Series Programmer’s Manual 137
Field Valid Inputs Meaning
a
1, 2, 3 and 4 Rotation
b 9 Fixed Value
c 1 to 9, A to Z, and a to z Width Multiplier
d 1 to 9, A to Z, and a to z Height Multiplier
eee 000 to 999 (000 to 099 Reserved), A04 to A72, x04 – x72* Font/size
ffff 0000 to 9999 Row
gggg
0000 to 9999 Dependent upon printer. See Appendix K. Column
jj…j
Valid ASCII character string up to 255 characters followed
by a termination character.
Data
* Where x is an upper case letter, see Appendix H.
Table 8-7: Smooth Font Record Structure
3.
Scalable Fonts
The Smooth Scalable Font Technology has been licensed from AGFA. Both Intellifont (.CDI) and
TrueType (.TTF) Scalable Font file formats are supported. The eee field identifies the scalable
font, and data type – normal (binary) or Hex ASCII. Uppercase S or U – binary, lowercase u – Hex
ASCII. See Appendix H for additional information. Values S00 to S9z, and U00 to U9z (u00 to
u9z), select a scalable font, either internal or downloaded.
S00 and S01 are used for the standard internal (resident) fonts on display-equipped printers, while
S01 is used for the standard internal (resident) font on non-display models.
Field Valid Inputs Meaning
a 1, 2, 3 and 4 Rotation
b
9 Fixed Value
c
1 to 9, A to Z, and a to z Width Multiplier
d
1 to 9, A to Z, and a to z Height Multiplier
eee
S00 to Szz, U00-Uzz, u00-uzz Font data type
ffff 0000 to 9999 Row
gggg Dependent upon printer. See Appendix K. Column
hhhh P004-P999, 0016-4163*
Character height;
points, dots
iiii
P004-P999, 0014-4163*
Character width;
points, dots
jj…j
Valid ASCII character string up to 255 characters followed by
a termination character.
Data
* Character size specifications are print head resolution dependent as indicated in the following table.
Table 8-8: Scalable Font Record Structure