Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 259)

Class Series Programmer’s Manual 245
Appendix M
Commands by Function
Commands by Function
Function Command
Backup speed pa
Batch quantity request <SOH>E
Cancel <SOH>C
Character bit-mapped data <ESC>(snnnWdata
Character code <ESC>*cnnnE
Character dump mode <STX>P
Column offset amount Cnnnn
Configuration label and dot pattern print <STX>Z
Configuration Set (See Table 5-1 for individual listings) <STX>Kc
Continuous paper length <STX>cnnnn
Count by ^nn
Cut <STX>o
Cut by :nnnn
Cut by cnn
Decrement alphanumerically <fii
Decrement numerically - fii
DIP switch, host controlled settings <STX>Vn
Dot size height and width Dwh
Edge sensor enable <STX>e
Feed rate <STX>Sa
Feedback characters enable <STX>a
Field data line terminator Tnn
File delete from module <STX>xmfname
Firmware version request <STX>v
Font descriptor <ESC>)snnnW
Font ID number <ESC>*cnnnD
Form feed <STX>F
Set Present Distance <STX>Kfnnnn
Format attribute An
Graphics image download <STX>Iabfname c
r
Heat setting Hnn
Inches <STX>n
Increment alphanumerically >fii
Increment numerically +fii
Label format field replacement <STX>Unnstring
Label formatting start <STX>L
Label length maximum <STX>Mnnnn
Table M-1: Commands (A-L)