Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 63)

Extended System-Level Command Functions
Class Series Programmer’s Manual 49
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Display-Equipped Media Settings
Head Cleaning HC 0 – 9999
Inches (or centimeters)
multiplied by 1000
EX2 N/A
N/A
Display-Equipped Print Control
Non-Display 23
Heat HE 0 – 30 N/A
Non-Display 21
Hnn
Display-Equipped Communications
Host Timeout HT 1 – 60 Seconds
EX2 N/A
N/A
Y, N
Y = Enabled,
N = Disabled
Display-Equipped Communications
Ignore Control Codes
IC
1, 0
1 = Enabled,
0 = Disabled
Non-Display N/A
N/A
Ignore Distances IE 1, 0
1 = Enabled,
0 = Disabled
Non-Display N/A N/A
Display-Equipped System Settings
EX2 N/A
Imaging Mode IL M, S
M = Multiple label,
S = Single label
Non-Display 22
N/A
Table 5-1: Configuration Set Commands (continued)