Datamax-O'Neil Class Series Programmer’s Manual - Manual (Page 72)

Extended System-Level Command Functions
Class Series Programmer’s Manual 58
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Applicable
Printer Type
Menu Item Equivalent
or Menu Item Number
Command
Equivalent
Security Lock Sl N, Y, T See Table 5-9. Display-Equipped System Settings N/A
Display-Equipped
Sensor Gain Value SG 0 – 32 N/A
EX2
Media Settings N/A
Display-Equipped Media Settings
Non-Display
<STX>e,
<STX>r,
<STX>c
Sensor Type ST G, C, R
G = Gap (edge),
C = Continuous,
R = Reflective
Non-Display
2
<STX>KD
Display-Equipped Communications
Non-Display 9 & 10
N/A
Serial Port
SP
xyz See Table 5-12.
Non-Display 7 & 8 <STX>KD
Display-Equipped System Settings
Single Byte Symbol Set AS
2-Byte alpha
character
AA – ZZ, printer
resident symbol set
Non-Display N/A
<STX>y,
ySxx
Slew Speed FS
Alpha
character
Model specific ranges;
see Appendix L.
GPIO-Equipped Print Control <STX>KZSx
Table 5-1: Configuration Set Commands (continued)