Burkert Type 8793 - Manual (Page 150)

150
Auxiliary functions
26.2.22.4. Activation of diagnosis functions
In the ADD.DIAGNOSE menu several diagnosis functions are activated and incorporated into the DIAGNOSE
main menu.
Activatable diagnosis functions:
HISTOGRAM
Graphical display of the dwell time density and movement range.
SERVICE.TIME
Operating-hours counter
TRAVEL.ACCU
Path accumulator
CYCLE.COUNTER
Direction reversal counter
TEMP.CHECK
Temperature monitor
STROKE.CHECK
Monitoring of the mechanical end positions in the armature
PV.MONITOR
Process actual value monitoring (only for Type 8793, process control)
POS.MONITOR
Position monitoring
Table 74: ADD.DIAGNOSE; overview of diagnosis functions
The exact description can be found in Chapter “26.2.22.6. Description of the diagnosis functions”
ADD.DIAGNOSE.-.Activating.diagnosis.functions:
Key Action Description
MENU Press for approx. 3 s Switching from process level setting level.
/ Select DIAGNOSE (To do this, the DIAGNOSE auxiliary function must already have
been activated by incorporation into the main menu (MAIN)).
ENTER Press The submenus are displayed.
/ Select ADD.DIAGNOSE
ENTER Press
The other diagnosis functions are displayed.
/ Select required diagnosis
function
ENTER Press The required diagnosis function is now marked by a cross .
either
/ Select further diagnosis
functions
Keep repeating until all required diagnosis functions have been
marked with a cross .
ENTER Press
or
EXIT Press Acknowledgment and simultaneous return to the DIAGNOSE main
menu.
The marked diagnosis functions have been activated and the setting
menus are now in the
DIAGNOSE main menu.
Table 75: Activation of diagnosis functions
english
Type 8792, 8793