Burkert Type 8793 - Manual (Page 29)

29
Description of System
11. TECHNICAL DATA
11.1. Conformity
In accordance with the Declaration of conformity, Type 8792 / 8793 is compliant with the EC Directives.
11.2. Standards
The applied standards which are used to demonstrate compliance with the EC Directives are listed in the
EC-Type Examination Certificate and/or the EC Declaration of Conformity.
11.3. Operating conditions
NOTE!
If.used.outside,.the.device.may.be.exposed.to.direct.sunlight.and.temperature.fluctuations.which.may.
cause.malfunctions.or.leaks!
• If the device is used outdoors, do not expose it unprotected to the weather conditions.
• Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the minimum value.
Environmental temperature 0 – +60 °C
Degree of protection IP 65 / IP 67* according to EN 60529
(only if cables, plugs and sockets have been connected correctly)
* If the device is used under IP 67 conditions, the ventilation filter (see
“Figure 1: Structure, Type 8792 / 8793” must be removed and the exhaust
air conducted into the dry area.
11.4. Rating plate and additional plate for Ex devices
Explanation.of.the.device-specific.specifications.on.the.rating.plate:
Type
8792 24V / DC
P = 1,4 ... 7 bar
Remote IP65/IP67
Tamb 0°C...+60°C
D-74653 Ingelfingen
Ser.-Nr.: 001000
00177689 W12LL
Operating voltage / control Example:
Identification number
Degree of protection
Nominal pressure
Ambient temperature
Serial number
Figure 8: Example of rating plate
English
Types 8792, 8793