Burkert Type 8793 - Manual (Page 70)

70
Operation
17.4.1. Setting date and time:
→
On the process level select the display for CLOCK using the arrow keys.
→
Press INPUT to open the input screen for the setting.
→
Set date and time as described in the following table.
Key
Key.
function
Description.of.the.function Input.screen.
Arrow key Switch to the next time unit (from right to left).
When the last time unit for the date has been
reached, the display switches to the time units for
the time.
If the last unit is at top left (hours), the display
switches back to the first unit at bottom right (year).
MENU + <– INPUT
12:00
00
Thu....01...09...11
CLOCK
Arrow key Increase value.
When the largest possible value has been reached,
0 is displayed again.
Left
selection key ESC Return without change.
Right
selection key OK Accept the set value.
Switching the display.
Table 28: Setting date and time
English
Type 8792, 8793