Burkert Type 8793 - Manual (Page 7)

7
General Information
Safety Instructions
2. AUTHORIZED USE
Incorrect.use.of.the.Type.8792.and.8793.can.be.dangerous.to.people,.nearby.equipment.and.the.
environment..
The device is designed for the open-loop control and closed-loop control of media.
• If using Types 8792 and 8793 in the potentially explosive area, observe the specifications on the additional
plate for Ex devices.
• Devices which do not have an additional plate for Ex devices must not be used in the potentially explosive
area.
• The device must not be exposed to direct sunlight.
• Pulsating direct voltage (rectified alternating voltage without smoothing) must not be used as operating
voltage.
• During use observe the permitted data, the operating conditions and conditions of use specified in the con-
tract documents and operating instructions, as described in chapter “Description of System” - “11. Technical
data” in this manual and in the valve manual for the respective pneumatically actuated valve.
• The device may be used only in conjunction with third-party devices and components recommended and
authorised by Bürkert.
• In view of the wide range of possible application cases, check whether the device is suitable for the specific
application case and check this out if required.
• Correct transportation, correct storage and installation and careful use and maintenance are essential for reli-
able and faultless operation.
• Use the Type 8792 and 8793 only as intended.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
english
Type 8792, 8793 Type 8792, 8793