Burkert Type 8793 - Manual (Page 151)

151
Auxiliary functions
26.2.22.5. Description of the DIAGNOSE main menu
1.. D.MSG . –.Diagnosis.messages
All generated diagnosis messages are listed in the D.MSG menu where they can be viewed and deleted. The status
signal, which is assigned to the diagnosis message, is indicated by a symbol.
Display example of a list with diagnosis messages
EXIT ENTER 29-1-1
>> D.MSG <<
SERVICE.TIME
PV.MONITOR
==================
TRAVEL.ACCU
Diagnosis
message
Symbol for the assigned status
signal
Display example of the description text of a diagnosis message
EXIT CLEAR –––
TRAVEL.ACCU
travel accu
exceeded
Viewing.and.deleting.a.diagnosis.message:
Key Action Description
/ Select D.MSG
ENTER Press All generated diagnosis messages are displayed.
/ Select required message
ENTER Press Opening the diagnosis message. The description text is displayed
(in English).
EXIT Press Closing the diagnosis message and return to D.MSG.
or
CLEAR Hold down
as long as countdown (5 ...) is
running
Deleting the diagnosis message and return to D.MSG.
EXIT Press Return to the DIAGNOSE main menu.
Table 76: D.MSG; viewing and deleting a diagnosis message
2.. CONFIG.MSG . –.Assignment.of.status.signals.according.to.NE.107.(NAMUR.recommendation)
The status signals of the diagnosis messages can be changed in the CONFIG.MSG menu.
The menu indicates only diagnosis functions which can output a message and which have already been
activated in the
ADD.DIAGNOSE menu.
The status signals have different priorities.
english
Type 8792, 8793