Burkert Type 8793 - Manual (Page 78)

78
Start-Up
23.1. INPUT - Setting the input signal
This setting is used to select the input signal for the set-point variable.
Procedure:
Key Action Description
MENU Press for approx. 3 s Switching from process level setting level.
/ Select INPUT
ENTER Press
The possible input signals for INPUT are displayed.
/ Select input signal
(4-20 mA, 0-20 mA,....)
SELEC Press The selected input signal is now marked by a filled circle .
EXIT Press Return to the main menu (MAIN).
EXIT Press Switching from setting level process level.
Table 33: Setting the input signal
Operating structure:
INPUT 4-20 mA
0-20 mA
0-10 V
0-5 V
Select the input signal
EXIT
ENTER
SELEC
X.TUNE
Press for approx. 3 s
Process.level (values are displayed)
MENU
Setting.level
ADD.FUNCTION
EXIT
Figure 33: Operating structure INPUT
English
Type 8792, 8793