Burkert Type 8793 - Manual (Page 68)

68
Operation
Possible.displays.in.AUTOMATIC.operating.state
MENU HOLD CMD / POS (t)
Graphical display of POS and CMD with time axis
MENU INPUT X.TUNE INPUT
12:00
00
Thu....01...09...11
CLOCK
Time, weekday and date
MENU CMD/POS CLOCK
INPUT
4.0
mA
Input signal for set-point position
(0 ... 5/10 V or 0/4 ... 20 mA)
Only.for.operation.as.position.controller..
MENU CLOCK CMD/POS RUN
X.TUNE
Automatic adjustment of the position controller
MENU X.TUNE P.LIN RUN
P.TUNE
Automatic optimization of the process controller parameters
Only.for.type.8793
MENU P.TUNE CMD/POS RUN
P.LIN
Automatic linearization of the process characteristics
Only.for.type.8793
MENU P.LIN SP/PV MANU
0.0 CMD
POS 0.0
Simultaneous display of the set-point position and the actual position
of the valve actuator
(0 ... 100 %)
MENU CMD/POS POS MANU
0.0 SP
PV 0.0
m3/min
m3/min
Simultaneous display of the set-point position and the actual position
of the valve actuator
(0 ... 100 %)
Only.for.type.8793
Table 26: Displays of the process level in AUTOMATIC operating state
English
Type 8792, 8793