Interfaces, Safety settings if the bus fails, . interfaces – Burkert Type 8793 User Manual
Page 208: . safety.settings.if.the.bus.fails
208
DeviceNet
Drop line length
(Drop Lines)
Baud.rate
Length.of.the.drop.lines
Maximum.length
Maximum.total.length.Drop.lines.
in.the.network
125 kbaud
6 m for all baud rates
156 m
250 kbaud
78 m
500 kbaud
39 m
Table 110:
DeviceNet; drop line length
31.3. interfaces
Input for process
actual value*
4 – 20 mA
frequency
Pt 100
Binary input
24 V DC
Type.8792/8793
DeviceNet
2 binary outputs
24 V PNP
Initiator 1 / Initiator 2
24 V PNP NO
Inputs
Outputs
Supply
Operation
Note:
Optional inputs and outputs are illustrated by dotted lines
Bus
Bus
*
only for process controller Type 8793
Figure 124: DeviceNet interfaces
31.4. Safety settings if the bus fails
The position is approached which corresponds to the set-point value last transferred (default setting).
Other setting options (see chapter “33.3. BUS.COMM – Settings on Type 8792/8793”
).
english
Type 8792, 8793