Burkert Type 8793 - Manual (Page 52)

52
Installation
Type 8792, 8793
english
14.1. Type 8792 - designation of the circular plug-in
connectors
X4 - M8, 4-pole socket X1 - M12, 8-pole circular connector Functional earth FE
Operating voltage
and diverse signals Binary outputs
optional
4 2
1 3
1 2
3
4
5
6
7
8
Figure 24: Type 8792; designation of the circular plug-in connectors and contacts
14.2. Connection of the positioner Type 8792
→
Connect pins according to the model (options) of the positioner.
14.2.1. X1 - M12, 8-pole circular connector
Pin Wire.colour* Configuration On.the.device.side External.circuit./.Signal.level
Input.signals.of.the.control.centre.(e.g..PLC)
1 white Set-point value
+ (0/4 – 20 mA or 0 – 5/10 V
1 + (0/4 – 20 mA or 0 – 5 / 10 V)
completely galvanically isolated
2 brown Set-point value GND 2 GND set-point value
5 grey Binary input 5 +
0 – 5 V (log. 0)
10 – 30 V (log. 1)
6 pink Binary input GND 6
GND (identical with the GND
operating voltage)
Output.signals.to.the.control.centre.(e.g..PLC).-.(only.used.for.analog.output.option)
8 red Analogue feedback +
8 + (0/4 – 20 mA or 0 – 5 / 10 V)
completely galvanically isolated
7 blue Analogue feedback GND 7 GND Analogue feedback
Operating.voltage
3 green GND 3
24 V DC ± 10%
max. residual ripple 10%
4 yellow +24 V 4
* The indicated wire colours refer to the connection cable, part no. 919061, available as an accessory.
Table 13: Pin assignment; X1 - M12, 8-pole circular connector