CONTREX CX-1200 - Manual (Page 42)

2-28
ANALOG I/O CARD (OPTIONAL)
This section contains the mounting and wiring information for the Analog I/O Card. Please read this section
prior to mounting or wiring the Analog I/O Card to ensure that you make the appropriate decisions.
The Analog I/O Card is an auxiliary analog card with two analog inputs and one analog output. Both the
inputs and output are factory calibrated for + 12V or 0 to 20 mA signals. Some of the Monitor Parameters
can be used in connection with the analog output for either auxilary control or monitoring. Analog process
signals can be used in connection with the analog inputs to replace the following:
Lead Sensor Offset Source
Follower Sensor Offset Source
Phase Source