CONTREX CX-1200 - Manual (Page 70)

3 - 5
SCREEN OPERATION
The CX–1200 screen matrix has three main screens. These screens are:
Status Screen
Main Menu
Help Screen
There are nine sub-menus that are accessed through the Main Menu screen. These sub-menus are:
Setup
Scaling
Setpoints and Ramps
Tuning
Alarms and Limits
Blocks
PLC
System Monitor
Device Test
All of the parameter screens are accessed through these nine sub-menu screens. You can use the parameter screens
to access the parameters. Parameters fall into two classifications; Control Parameters and Monitor Parameters.
The Control Parameters allow you to enter data that is unique to you system. The Monitor Parameters allow you to
monitor your system and diagnose problems.
This Screen Operation section is a basic overview of the three main screens; the Status screen, the Help screen and
Main Menu screen. There is also a sample of a sub menu screen. For specific details on the parameter screens,
refer to System Setup-Control Parameters and System Monitoring-Monitor Parameters. For the instructions to
customize the Status screen, refer to System Setup-Control Parameters :Setup/Status Screen Setup.
Refer to Figure 3-2 for an overview of the CX–1200 screen matrix.