Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 110)

Active Reagents - Use this section to change calibration or performance verification kits,
lot numbers and expiration dates, or to delete a kit.
• Calibration Kit - Select a calibration kit from this list. Details of the selected kit display in
the Lot Type, Active Lot Number, and Expiration Date fields.
• Performance Verification Kit - Select a performance verification kit from this list.
Details of the selected kit display in the Lot Type, Active Lot Number, and Expiration
Date fields.
• Delete Kit - These buttons delete the selected calibration or performance verification kit.
• Active Reagents table - This displays information about the selected reagent. It allows
you to choose whether the lot is CAL, VER, Fluidics 1, or Fluidics 2. That choice is
displayed in the Lot Details area. The choice changes what columns appear in the table
in the Lot Details area.
NOTE: Select an active lot number for the selected reagent from this list.
• Lot Details - Displays lot information for the lot selected in the Active Reagent area.
• Lot Type - Displays the lot type selected.
• Lot # - Enter the lot number after clicking Add New.
• Expiration - Select this to edit the expiration date after clicking Add New.
• Lot Details table - This table enables you to enter target MFI values for the type of lot
you selected in the Active Reagents area. If your choice was CAL, enter targets for
CL1, CL2, CL3 and RP1 and EDR. If it was VER, enter targets for each channel for each
reagent. If it was Fluidics 1 or 2, you cannot enter any targets.
• Calibrator - If a calibration reagent is selected, the Lot Details table displays Channel
and Target information.
xPONENT ® for FLEXMAP 3D ®
96