Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 39)

2. In the Samples list section, choose the protocol you want to edit, then click Details. The
Edit Samples subtab opens.
3. Click a sample, then use the Move arrows to move it up or down in the sample list,
changing the order in which they will be acquired.
4. To add a new sample to the list, click New, then perform the following steps:
a. In the ID box, type the sample ID.
b. Type a patient first name in the First name box if desired
c. Type a patient last name in the Last name box if desired.
d. To add a comment about the sample, type it in the Comment box; this is optional.
e. Click Save to add the sample to the Sample list.
5. To edit an existing sample, click the sample, then click Edit.
6. Once you have completed editing the sample list, click Close.
Samples Page
25