Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 76)

• Plate Layout - Opens the Report dialog box, which contains the Batch Plate Layout
Report.
• Approve - Opens the Batch Approval Confirmation dialog box to approve the selected
batch.
Only approved batches can be transmitted to the LIS. If your software is licensed for LIS
use, you can transmit batches to the LIS from the Sample Results tab. After you have
approved a batch, the status of the batch changes to Approved in the Complete Batches
list.
• Exp Results - Opens the Save As dialog box to choose an export destination for the .CSV
file containing your results.
• Import - Opens the Open dialog box so you can select a batch file (.mdf) to import. Select
Include Raw Files (LXB) to include raw files in the import. Select Overwrite to overwrite
existing files.
• Export - Opens the Export Batch dialog box, where you can choose a location for the file
you selected to export. Select Include Raw Files (LXB) to include raw files in the export.
Select Overwrite to overwrite existing files.
• Replay - Opens the Select Replay Mode dialog box. This box enables you to use the data
stored in the run files from the initial acquisition to reprocess a batch, creating a new batch
output file. A batch can be reprocessed multiple times. When you replay or recalculate a
batch, you perform the same steps to create the batch as you did when you created the
batch the first time. This sequence varies based on whether or not you created a new
batch from a new protocol or a new batch from an existing protocol. The initial batch data
and output file always remain intact and unchanged. Each time you replay a batch, the
system handles it as if it is new data, and creates a separate batch entry and output file.
• Replay batch - Use to replay raw bead data files. The bead data files are replayed
using the gate, analyte, analysis settings, and plate layout that were selected in the new
or updated protocol. Settings such as bead type, volume, timeout, XY heater, and report
gain have no effect on the replayed results.
xPONENT ® for FLEXMAP 3D ®
62