Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 79)

• Trimmed%CV of microspheres
• Trimmed Standard Deviation
• Trimmed Peak
• %CV of Replicates
• % Recovery
• Expected Result - The known or expected test result value for a standard or control.
• Control Range - Low - The lowest value for an assay control used to determine pass/
fail criteria for an assay.
• Control Range - High - The highest value for an assay control used to determine pass/
fail criteria for an assay.
• Normalized New Median
• Units
• Analyte - Contains a list of analytes run in the batch. Select an analyte to view all statistics
for that analyte.
• Displayed Well - Displays the number of the well whose contents currently appear in the
graph.
• Results pane - Displays statistics related to the batch.
• Use the up, down, left, and right arrow buttons to move through the table, or use the
scroll bars.
• Plate - Select the plate you want to view, if there is more than one plate.
CAUTION: If using multiple plates, ensure that plates are used in the proper
order. Failure to do so can result in inaccurate data and test
results.
• Save Image
• Formula - Opens the Change Analysis dialog box with a list of analytes used in the batch.
Click an analyte to open the Analysis Settings dialog box from which you can select a
new analysis setting for the analyte.
• Default - Returns to the default view.
• Edit Patients - Updates patient information.
• 3D - Ability to look at a region map in three dimensions.
NOTE: The 3D option must be enabled on the Admin > System Settings
page.
• Approve - Opens the Batch Approval Confirmation dialog box, which contains the data
for analytes selected in the Results tab. Click Yes to approve the batch. The dialog box
confirms the approval.
• Validate - Validates an entire selected row or cell in the Results table. Average rows or
cells cannot be selected. If you haven't selected an item or the item you selected does not
need to be validated, a warning dialog box displays. Your xPONENT
® system administrator
must give you privileges to invalidate standards if you are using the Secure xPONENT ®
package.
• Invalidate - Invalidates an entire selected row or cell in the Results table. The selection will
turn red when invalidated. Select the same item and click Validate to remove the
invalidation status.
Results Page
65