IAI America IA-101-X-USBMW User Manual
Page 130
8. Parameter Edit W
indow
122
Parameter file saved by
controller incompatible
with increased memory
Parameter saved by
controller compatible
with increased memory
Parameter file saved by
controller compatible
with increased memory
Parameter saved by
controller incompatible
with increased memory
When parameter file saved by controller
incompatible with increased memory is transferred
to controller compatible with increased memory
When parameter file saved by controller
compatible with increased memory is transferred
to controller incompatible with increased memory
8.2 Saving Parameter Data and Closing the Edit Window
(1) Saving to a file the parameter data you are editing
Click the Save to File button in the parameter edit window.
This is the same as clicking File (F) and then selecting Save As (A).
(2) Transferring to the controller the parameter data you are editing
You can save the parameter data you are editing to the controller’s memory.
Click the Transfer to Controller button in the parameter edit window.
The number of the parameters has been increased for the X-SEL-P/Q, PX/QX controllers (w/gateway
function) compatible with increased memory.
The Number of Parameters
X-SEL-P/Q incompatible
with increased memory
X-SEL-PX/QX incompatible
with increased memory
X-SEL-P/Q, PX/QX
compatible with
increased memory
I/O
250
400
600
For all axes
120
300
400
For each axis
200
220
250
Driver
97
97
97
Encoder
30
30
30
I/O Device
82
82
82
Others
100
120
200
Please be noted as follows.
* When the parameter file saved by the X-SEL-P/Q, PX/QX controller incompatible with increased
memory is transferred to the X-SEL-P/Q, PX/QX controller compatible with increased memory, or when
the parameter file saved by X-SEL-P/Q, PX/QX controller compatible with increased memory is
transferred to the X-SEL-P/Q, PX/QX controller incompatible with increased memory, only the
parameters supported by the X-SEL-P/Q, PX/QX controller incompatible with increased memory, as
shown below.