IAI America IA-101-X-USBMW - Manual (Page 164)

11. Monitor
156
In the case of the SSEL, ASEL or PSEL controller, the Status of Positioner Mode can be checked by Status 3.
(3) Axis status monitor window
This window shows the status of each axis.
Fig. 11.5 Axis Status
When the super-high impellent actuator is operated by the SSEL controller, the belt breaking detection
sensor can be monitored in Axis Status monitor. (PC interface software version 7.2.0.0 or later)
Belt breaking detection sensor
Fig. 11.6 Axis Status (Belt breaking detection sensor is added)