IAI America IA-101-X-USBMW - Manual (Page 143)

9. Symbol Edit W
indow
135
9.3 Saving Symbol Data and Closing the Edit Window
(1) Saving to a file the symbol data you are editing
Click the Save to File button in the symbol edit window.
This is the same as clicking File (F) and then selecting Save As (A).
After clicking Save to File button, File Save Select screen will be displayed.
For the X-SEL-P/Q, PX/QX controller compatible with increased memory (with gateway function), or R/S,
RX/SX, and RXD/SXD, symbols of programs No.65 or later and positions No.4001 or later cannot be
saves by the Symbol File Format 1 (normal format). Save them by the Symbol File Format 2 (extended
format)
(PC interface software version 7.2.0.0 or later)
Fig. 9.5 File Save Select Screen
(2) Transferring to the controller the symbol data you are editing You can save the symbol data you are
editing to the controller’s memory.
Click the Transfer to Controller button in the symbol edit window.
This button is selectable only in the online edit mode.
* The data saved by Symbol File Format 1 (normal format) can be transferred to the X-SEL-P/Q, PX/QX
controllers compatible with increased memory (with gateway function).
All symbols having been saved in the controller before transferring will be cleared.
* The data saved by Symbol File Format 2 (extended format) can be transferred to a controller
incompatible with increased memory. All symbols having been saved in the controller before transferring
will be cleared.
Caution: After placing a check mark at
‘Always save with Format 2,’ the data
will be always saved with Format 2 and
this screen will not be displayed again.
For displaying this screen, go to the
Environment Setup screen (16. Tool).