IAI America IA-101-X-USBMW User Manual
Page 31
1. Before
You Begin
23
[8] Then, insert the USB conversion adapter (IA-CV-USB) into the USB port of your PC.
In the case of the SSEL/ASEL/PSEL controller or TT (table top actuator), connect the PC and
SSEL/ASEL/PSEL controller or TT with the attached USB cable.
(Note) If the USB ports of PC and controller are connected directly with USB cables, each controller
should be connected to each PC and use the USB Conversion Adapter Driver Software to let the
hardware found.
Follow the procedures from [9] to [19] for all the controllers to be connected. The COM port will be
made for each controller.
[9] Windows will open the Welcome to the Found New Hardware Wizard.
Select the checkbox "Yes, now and every time I connect a device."
Click
Next >
Fig. 1.14 Welcome to Found New Hardware Wizard Screen
[10] A "Installation Method Selection Screen" will appear. Select the checkbox "Install from a list or specific
location (Advanced)."
Click
Next >.
Figure 1.15 Installation Method Selection Screen