IAI America IA-101-X-USBMW User Manual
Page 62
2. How to Save Data
54
Parameter file saved by
controller incompatible
with increased memory
Parameter saved by
controller compatible
with increased memory
Parameter file saved by
controller compatible with
increased memory
Parameter saved by
controller incompatible
with increased memory
When parameter file saved by controller compatible with
increased memory is transferred to controller
incompatible with increased memory
When parameter file saved by controller incompatible with
increased memory is transferred to controller compatible
with increased memory
Note on the increased number of parameters:
The number of the parameters has been increased for the X-SEL-P/Q, PX/QX controllers (w/gateway
function) compatible with increased memory.
The Number of Parameters
X-SEL-P/Q incompatible
with increased memory
X-SEL-PX/QX
incompatible with
increased memory
X-SEL-P/Q, PX/QX
compatible with
increased memory
I/O
250
400
600
For all axes
120
300
400
For each axis
200
220
250
Driver
97
97
97
Encoder
30
30
30
I/O Device
82
82
82
Others
100
120
200
Please be noted as follows.
* When the parameter file saved by the X-SEL-P/Q, PX/QX controller incompatible with increased memory
is transferred to the X-SEL-P/Q, PX/QX controller compatible with increased memory, or when the
parameter file saved by X-SEL-P/Q, PX/QX controller compatible with increased memory is transferred
to the X-SEL-P/Q, PX/QX controller incompatible with increased memory, only the parameters supported
by the X-SEL-P/Q, PX/QX controller incompatible with increased memory, as shown below.